The P modules are used for the power adjustment of input and output signals. They may
contain performance elements (transistors, thyristors, relays) and a galvanic separation.
Control logic of the modules is in the 5V or 24V versions.
Modules in 5V logic connect
to P bus of the KITxxx computer or to P bus of IOP, IOPCOM or IOP485I cards, and are galvanic-linked to the
control unit.
Modules in 24V (12V) logic connect to IODIOxx, IODOOxx or IODXOxx cards that are equipped with galvanic
insulation. The connection is performed using a flat cable with cutting connectors.
The KITV40 computer and P modules can be placed in mounting frames that can be directly fitted
onto DIN/EN TS 32 and TS 35 anchoring bars. The following are available P modules:
| 5.1 PDOR02 |
Module of 8 relays
- 5V version, 24V version
- each relay with one switching contact
- max. switching voltage 24V DC, 220V AC
- max. switching current 8A
- LED indication
|
| 5.2 TRANOUT8 |
Module of 8 MOS switches in version P or N
- 24V version
- switched current 2A permanently
- output type: semiconductor switch MOS (PMOS or NMOS)
- LED indication
|
| 5.3 PDOT03 |
Module of 8 transistor outputs
- 24V version
- max. permanent loading current according to transistor type 2 to 10A
- max. voltage according to transistor type 50 - 200V
- indication LED
|
| 5.4 PDIO08 |
Module of 8 opto inputs and 8 opto outputs
- 5V version
- input current 10 mA
- output level: 10 mA/35V, 100 mA/300 V (special order)
- insulation strength 2500 V
- LED indication
|
| 5.5 PDIO40 |
Module of digital inputs and outputs for KOMPAKT
- 5V version
- 16x digital input, input current 10 mA, max. inp. voltage 30V, optron insulation.
These inputs are connected to KITxxx P-bus, port A,B
- 8x digital output,
output type relay 24V/5A, optionally optorelay 60V/2A or optron with transistor 35V/0,2A.
- 8x digital input wires, connected to TERM10B card inputs
- 8x digital output wires, connected to TERM10B card outputs
- COM-bus to RS485 converter, connectable to KITxxx COM-bus
- all signals terminate in Entrelec connectors
These outputs are connected to KITxxx P-bus, port C
The module is an extension card to the TERM10 terminal and it makes a basis
of a simple compact control system KOMPAKT1, with KITV40 together.
|
| 5.6 PDOX01 |
Module of 4 triac zero switches
- 5V version, 24V version
- switched current 2 A
- switched voltage 220/380 V
- LED indication
|
| 5.7 PIND01 |
Module of LED diodes and buttons
- 5V version, 24V version
- 8 x big LED diode
- 8 x button
|
| 5.8 PMUX01 |
Eightfold relay multiplexer 4 -> 1
- 24V version, control by IODOOxx or IODXOxx card
- 4 same sections, each:
-- contains 3 relays, each with 2 switching contacts
-- switches 2x4 input signals to 2 output signals
-- output signals are designated for IOADDAxx card
|
| 5.9 PMUX02 |
Relay analogue multiplexer 8 -> 1
- 24V version, control by IODOOxx or IODXOxx card
- 8 inputs for resistance sensors (thermometers etc.)
- relay multiplexer 8 -> 1
- converter R/U
- direct connectable to IOADxxx cards, input range 0 to 5V
|
| 5.10 PDIO02 |
module of 8 fast digital inputs
- galvanic insulation ensured by fast optrons 6N137
- output connector is conformed to direct connecting with IOFLEX card
- input voltage 24Vdc or 5Vdc or 6Vdifferential
- signal frequency at maximum 5MHz
- external supply 5Vdc
|
| 5.11 PRIN01 |
Module of 8 resistive inputs
- connection of 8 resistive sensors PT100
- sesnor current 0,5mA
- sensor resistance range 80,31 Ohm to 176,86 Ohm
- temperature range -50 to 200°C (Pt100 3850ppm)
- output voltage 0 to 5V
|
| 5.12 PRIN01.02 |
Module of differential amplifiers
- 8 amplifiers of mV signals
- outputs 0 to 10V
- range, gain according to customer order
- for connecting of strain gauge sensors
- external supply 24VDC
|
| 5.13 PMUX03 |
Analog signal Multiplexer
- 12 pairs of diferential or unipolar signals
- semiconductor switches
- range 0-10V
- connection of strain gauge sensors to commnon amplifier and A/D converter
- includes the precise power supply for senzor drive
- external supply 24VDC
|
| 5.14 PDOT09 |
Module of 8 transistor switches
- 8 tranzistor switches 80V/2A
- decreased holdind current from 24V
- LED indication
|